A solid can be understood as a stack of very thin slices. If you know the area of every cross section, multiplying each area by a small thickness and adding gives the volume. The challenging step is turning the base region's width into the correct cross-sectional area.
Integrate area, not a side length
For slices perpendicular to the x-axis, let be the area of the cross section at . Then
The units explain the formula: square units times length units produce cubic units. A boundary gap such as is usually a length, so it must be converted to the area of the stated shape before integration.
If slices are perpendicular to the y-axis, use The slice direction determines which boundary distance and interval are relevant.
Example: square cross sections
A solid has a base bounded by and Cross sections perpendicular to the x-axis are squares. The base intersections occur at and 2. A vertical segment in the base has length which is the square's side.
Thus and
Expanding gives Using symmetry, the integral is cubic units.
Integrating only would compute the base's area, not the solid's volume. The square shape is precisely why the gap must be squared.
The base region lies under y equals 4 minus x squared from minus two to two. A vertical segment at x equals one has length three and determines the side of a square cross section.
The base segment at has length 3. It becomes a square side, so its cross-sectional area is 9, not 3.
Describe this figure
The base region lies under y equals 4 minus x squared from minus two to two. A vertical segment at x equals one has length three and determines the side of a square cross section.
Marked points: Side = 3: filled marker at (1, 3).
Match the given length to the shape
If a cross section is an equilateral triangle with side , its area is If it is a semicircle with diameter , its radius is so its area is
The words “side,” “diameter,” “radius,” “leg,” and “hypotenuse” change the formula. A right isosceles triangle with leg has area If is its hypotenuse, each leg is and the area is instead. Identify exactly which part of the cross section lies in the base.
Example: semicircles above a triangular base
A base region lies between and for Cross sections perpendicular to the x-axis are semicircles whose diameters lie in the base. The diameter is , so
Using would treat the diameter as a radius and make the result four times too large. A labeled sketch of one slice is often enough to prevent that mistake.
If the same base instead had rectangles whose heights were twice their base lengths, the cross-sectional area would be The base alone does not determine the volume; the cross-sectional shape and dimensions do.
Build the integral before calculating
A complete setup names the slice variable, interval, base length, and area formula. You can often earn the central mathematical result by writing this setup correctly even when the final integral needs a calculator.
If a boundary switches at an intersection, the expression for the cross-sectional length can change. Split the volume integral accordingly. A volume integrand must be nonnegative, and any proposed negative result signals an orientation or algebra error.
A cross section need not be similar at every position
Some problems specify a rectangle whose base is the boundary gap and whose height is a separate function of the slice location. If the base is and height is then not a constant multiple of the squared gap.
The general principle remains unchanged: write the actual area of the stated slice. Similar-shape formulas are convenient special cases, not a requirement of the volume method.
Try it yourself
The base lies between and for Perpendicular x-slices are equilateral triangles with sides in the base. Find the volume.
Answer: The side is so Therefore cubic units.
What to remember
Find the base segment, identify its role in the cross section, convert it to area, and integrate that area through the solid.