Integrating a rate gives net change. To recover a final amount, add that change to a known starting amount. Tables and graphs often provide enough information to do this even when no formula for the rate is available.
Start amount plus net change
If then
The integral is a change in Q, not automatically Q itself. If water enters a tank at rate I and leaves at rate O, the net rate is Integrate that difference, then add the initial volume.
Units expose the meaning. A rate in liters per minute multiplied by minutes produces liters. If a table lists volumes rather than rates, integrating those values would have different units and would not compute net volume change.
Example: use signed geometric areas
A tank starts with 50 liters. Its net-rate graph forms a triangle above the time axis from 0 to 4 minutes with height 6 liters per minute. From 4 to 7 minutes, it forms a triangle below the axis with depth 2 liters per minute.
The first signed area is liters. The second is liters. Therefore the final amount is liters.
The the absolute net rate would be liters, measuring total variation in the tank's amount. It would not equal the net change of 9 liters. It also would not necessarily equal total inflow, because inflow and outflow can occur simultaneously.
Example: estimate accumulation from a table
A machine produces parts at the following rates:
| Time in hours | Parts per hour |
|---|---|
| 0 | 20 |
| 1 | 28 |
| 3 | 40 |
Using trapezoids, the production estimate is parts. The widths differ, so each interval needs its own time factor.
If the machine had already produced 150 parts at time zero, the estimated cumulative count at hour 3 is The initial amount and integral have distinct jobs in the equation.
A table by itself generally does not determine the exact integral. Calling a trapezoidal estimate exact requires an additional assumption, such as a rate that changes linearly between recorded points.
Find when an amount is largest
The amount Q increases when its net rate is positive and decreases when is negative. Thus an interior change of from positive to negative identifies a local maximum of Q. To find an absolute maximum on a closed interval, compare Q at endpoints and all relevant critical times.
Do not select the time when the rate is greatest. That is when Q increases most quickly, not necessarily when Q is largest. A tank can continue filling after its inflow rate has peaked, as long as net inflow remains positive.
For competing inflow and outflow, candidates satisfy but verify the sign change of Equal rates can occur without a maximum.
Recover rates from accumulated information
If a problem defines then when is continuous. A table of rates can estimate changes in A; nearby rate values can also estimate using a difference quotient. Keep these operations separate: area estimates a total change, while slope estimates a change in rate.
Try it yourself
A reservoir begins with 200 cubic meters. Inflow is 12 cubic meters per hour and outflow is for When is its volume largest, and what is that volume?
Answer: Net rate is positive before 6 and negative after. The maximum occurs at 6 hours. Its volume is cubic meters.
What to remember
Name the rate, integrate with signs and correct interval widths, and add the starting amount. Extremes of an accumulated quantity depend on the sign of its rate, not on the rate's highest point.