The average value of a continuous function is the constant height that would produce the same total accumulation over an interval. It generalizes the arithmetic mean from a finite list of values to all values across a continuous input range.
Divide accumulation by interval length
For an integrable function on with its average value is
Imagine dividing the interval into equal pieces. An average of sampled heights is Since this equals Passing to the limit explains the formula.
The denominator is the interval's width, not the upper endpoint and not the number of measurements. If has units of degrees Celsius and is hours, the integral has degree-hours and dividing by hours restores degrees Celsius.
Example: average a changing temperature
Suppose temperature is modeled by degrees Celsius for hours. Then
The average temperature is 24 degrees Celsius. Averaging only the endpoint temperatures gives which is different. Endpoint averaging is exact for a linear function, but a curved temperature profile spends unequal amounts of time near different heights.
The integral is 48 degree-hours. A constant temperature of 24 degrees over 2 hours produces the same accumulation, which is the rectangle interpretation of average value.
temperature
- (dashed)
average
Temperature 20 plus 3t squared rises from 20 to 32 degrees. A dashed horizontal line marks the average value 24.
The horizontal line at 24 is the average temperature. It balances the curved temperature profile over the two-hour interval.
Describe this figure
Temperature 20 plus 3t squared rises from 20 to 32 degrees. A dashed horizontal line marks the average value 24.
Curves: temperature; average.
Average value is not average rate of change
For the same function, the average rate of change is degrees Celsius per hour. This answers how quickly temperature changes overall, not what temperature it averages.
The distinction is visible in the units. Average value has the function's units; average rate of change has function units divided by input units. A question asking for average velocity uses the average value of velocity, while one asking for average acceleration uses the average rate of change of velocity.
Example: signed velocity and average speed
Let meters per second on The average velocity is
The displacement is 1.5 meters over 3 seconds. Average speed instead uses total distance: Split at the sign change, The two triangular areas are and 2, so average speed is meters per second.
Negative velocity cancels positive velocity in displacement, but distances never cancel. Choosing the correct integrand is more important than the mechanics of integrating.
When does the function equal its average?
If is continuous on the Mean Value Theorem for Integrals guarantees at least one in the interval with For the temperature example, solve giving hours in the interval.
This is not the derivative Mean Value Theorem: here a function value equals an average height, not a derivative equaling a secant slope. The names are similar, so write the relevant equation explicitly.
Nonuniform observation times require weighting
If a function is known only from a table, first approximate its integral with interval widths, then divide by the full interval length. Suppose a rate is 2 at time 0, 4 at time 1, and 10 at time 4. A trapezoidal integral estimate is so the estimated average rate is 6.
The simple average of the three recorded rates is which ignores the unequal time gaps. An arithmetic mean of measurements and a time-average of a changing quantity need not be the same.
Try it yourself
Find the average value of on and an input where it is attained.
Answer: Solving gives Because the function is linear, this also equals the average of the endpoint heights 5 and 11.
What to remember
Average value is total signed accumulation divided by interval length. Choose the correct quantity to average, preserve its units, and do not confuse average height with average rate of change.