Dimensional analysis treats units as part of the algebra. A correct conversion changes the numerical description while preserving the physical quantity. It also gives you a way to detect equations that cannot be right before checking their arithmetic.
Arrange factors so units cancel
If either ratio of these equal quantities is a conversion factor equal to one. Choose the orientation that removes the unwanted unit.
To convert 55 miles per hour to feet per second, write
The result is about 80.67 feet per second. Miles and hours cancel; feet per second remain. Converting only the distance unit would produce feet per hour, which is not the requested rate.
Keep exact factors or fractions until the end when possible. Rounding each intermediate rate can create avoidable error in a final answer.
Example: cost from a rate with compound units
A machine uses 2.4 kilowatt-hours of energy per hour of operation. Electricity costs 0.18 dollar per kilowatt-hour. What is the energy cost of running it for 7.5 hours?
Multiply all three quantities:
Operating hours cancel, then energy units cancel. The remaining dollars identify the result as a cost. A fixed service fee would need to be added separately; it is not included in this usage-only calculation.
Notice that a unit name may itself describe a product. A kilowatt-hour is energy, not “kilowatts per hour.” Read compound units exactly as supplied.
Powers change the conversion factor
If 1 foot equals 12 inches, a square foot contains square inches, and a cubic foot contains cubic inches. The length factor must be applied to every dimension.
For example, 288 square inches is square feet. Dividing by 12 would convert only one of the two length factors. A drawing of a one-foot square subdivided into 12 rows and 12 columns explains why the count is 144.
The same reasoning applies to inverse powers. A density measured in grams per cubic centimeter requires converting the entire cubic-centimeter denominator, not just a centimeter.
Example: convert a density
A material has density Convert it to kilograms per cubic meter. One gram is 0.001 kilogram, and one meter contains 100 centimeters, so
A cubic meter contains one million cubic centimeters. Each contributes 2.7 grams, so the large numerical result is reasonable. Unit cancellation supports both the exponent and the orientation of the factor.
Unit consistency is necessary, not sufficient
In a distance formula, speed times time has units of distance, while speed divided by time does not. This can rule out an incorrect expression. But two expressions with matching units need not be equal: and both have distance units. You still need the relationship stated in the problem.
Temperature scales with different zero points are another caution. Converting Celsius to Fahrenheit requires not only multiplication by a unit ratio. The additive offset changes the zero point.
Try it yourself
A rectangular sheet has area 0.35 square meter. How many square centimeters is that? A vehicle uses 6 liters every 100 kilometers; how much fuel is needed for 250 kilometers at the same consumption rate?
Answer: square centimeters. Fuel use is liters. In each case, the factors leave exactly the requested unit.
What to remember
Treat units as algebraic factors, apply powers to conversion factors, and check the final dimension. Match units before substitution and postpone numerical rounding until the last step.