A scale factor tells how corresponding lengths change when a shape is enlarged or reduced without changing its proportions. The important surprise is that area and volume do not change by that same factor.
Start with corresponding lengths
If every length is multiplied by , the new shape is similar to the original. A scale factor of 3 triples each length; a factor of halves each length. Corresponding angles stay equal.
Perimeter is a sum of lengths, so it also changes by factor . Area multiplies two length dimensions, so its factor is Volume multiplies three, giving factor
A 2-by-3 rectangle enlarged by factor 4 becomes 8 by 12. Its perimeter changes from 10 to 40, a factor of 4. Its area changes from 6 to 96, a factor of 16. The extra factor comes from enlarging both directions.
The 2 by 3 rectangle and 8 by 12 rectangle have length scale factor 4. Their areas are 6 and 96, a factor of 16.
Describe this figure
The 2 by 3 rectangle and 8 by 12 rectangle have length scale factor 4. Their areas are 6 and 96, a factor of 16.
Example: compare similar triangles
Two similar triangles have corresponding sides 5 cm and 15 cm. The length scale factor from small to large is 3. Their perimeters are in ratio and their areas are in ratio
If the smaller triangle has area 12 square centimeters, the larger has area Multiplying by 3 would enlarge only one of the two area dimensions.
You do not need to know either triangle's height numerically. Similarity guarantees that the height also triples, which justifies the area factor.
Example: recover a length factor from area
Two similar shapes have areas 20 and 180 square units. The area factor is so the length factor is A side measuring 7 on the smaller shape corresponds to 21 on the larger.
Taking the square root reverses the squaring in the area rule. Do not use 9 as the side-length multiplier. State which direction you are scaling: large to small would use factor instead.
Volume changes in three directions
A cube with side 2 has volume 8. A similar cube with side 6 has volume 216. The side factor is 3, but the volume factor is
If two similar solids have volume ratio their length ratio is because Their surface-area ratio is then Surface area is still an area even though it belongs to a three-dimensional object.
These rules require every corresponding length to scale by the same factor. Doubling only a box's height doubles its volume, rather than multiplying volume by eight, because its other two dimensions are unchanged.
Scale drawings and units
On a map, 1 cm represents 5 km. A distance represents 15 km. An area of 3 square centimeters represents square kilometers, not 15. Each centimeter direction corresponds to 5 kilometers.
Before forming a dimensionless scale factor, express both lengths in matching units. A model 10 cm long representing a 2-meter object has scale
Try it yourself
A small solid and a larger similar solid have length ratio If the smaller volume is 24 cubic units, find the larger volume.
Answer: The volume ratio is Thus the larger volume is cubic units. The corresponding surface-area ratio would be
What to remember
Length uses , area uses and volume uses Work backward with square or cube roots, and use these rules only when the shapes are similar.