Composite-area problems ask you to organize a region into shapes with known areas. The drawing may look unfamiliar, but the pieces are often rectangles, triangles, and circles. Your first task is to decide what belongs to the requested region.
Choose addition or subtraction deliberately
Use addition when the desired region separates into nonoverlapping pieces. Use subtraction when a convenient outer shape contains an unwanted piece. Label every length needed by the formulas, including lengths you must infer from the diagram.
For an L-shaped region inside a 12 by 9 rectangle, suppose a 5 by 4 corner is removed. The area is square units. The remaining horizontal segment beside the missing corner is the remaining vertical segment is These are differences of lengths, not differences of areas.
A second solution cuts the L into a 12 by 5 rectangle and a 7 by 4 rectangle. Their areas add to Two valid decompositions provide a strong check.
Example: a rectangle with a triangular roof
A wall consists of a rectangle 10 meters wide and 6 meters high, topped by a triangle with the same 10-meter base and perpendicular height 3 meters. The areas are and The total wall area is 75 square meters.
The 3-meter measurement must be the perpendicular height of the triangle, not a sloping roof edge. If you were told only a sloping length, you might need a right triangle to find the height before calculating area.
The shared 10-meter edge is useful in both area formulas because it bounds two different pieces. It would not count toward the outer perimeter of the completed wall. Area decomposition and perimeter tracing are different tasks.
Example: a path around a garden
A rectangular garden measures 8 meters by 5 meters. A uniform path 1 meter wide surrounds all four sides. The outside dimensions are meters and meters. Each dimension gains the path width at both ends.
The path area is
square meters. Adding 1 to each dimension would account for a path on only one side of each direction. Multiplying the garden perimeter by 1 gives 26 square meters, which misses the four corner squares. The outer-minus-inner method includes them automatically.
The garden is 8 by 5. A path of width 1 on every side makes the outside rectangle 10 by 7.
Describe this figure
The garden is 8 by 5. A path of width 1 on every side makes the outside rectangle 10 by 7.
Shading does not supply extra information
If a circle of radius 3 lies entirely inside a square of side 8, the part of the square outside the circle has area Leave this exact unless an approximation is requested. If the circle extends outside the square, subtracting its whole area would remove too much: only the overlap should be removed.
Use the stated measurements, equal-length marks, and geometric relationships. A shape that looks like half of another shape is not necessarily half unless the information supports that conclusion.
Try it yourself
A 14 by 10 rectangle has a rectangular hole measuring 6 by 3. A triangular extension with base 10 and perpendicular height 4 is attached outside one side, without overlapping the rectangle. Find the total remaining area.
Answer: Start with 140, subtract the 18-square-unit hole, and add the 20-square-unit triangle. The result is square units. The extension adds area; the hole removes it.
What to remember
Find a decomposition that uses known dimensions. Include every wanted piece once, remove only unwanted overlap, and check whether widths are added on one side or both sides.