A prism has two congruent, parallel bases and the same cross-sectional shape all the way between them. A cylinder has the same idea with circular bases. Their volume formula is where B is the area of one base and is the perpendicular height.
Identify the base before calculating
The base is not necessarily the face that happens to be drawn at the bottom. For a triangular prism, the two matching triangles are the bases. The distance between them is the prism's height or length. You first find the area of a triangle, then multiply by that distance.
The formula works because every slice parallel to the base has the same area. Stacking equal layers fills the solid. A cylinder's layers are disks, so its base area is and its volume is
The height must be perpendicular to the base planes. A slanted edge in an oblique prism is longer than that separation and cannot simply replace it.
Example: a triangular prism
A triangular prism has a right-triangle base with perpendicular legs 6 cm and 8 cm. The prism extends 10 cm between its triangular ends.
The base area is square centimeters. Therefore the volume is cubic centimeters.
There are two different heights in the reasoning: the triangle's altitude is used to compute B, and the prism's length is used to stack the triangular layers. Multiplying 6, 8, and 10 without the factor of one half would count a rectangular prism twice as large.
Example: a cylindrical tank
A cylinder has diameter 10 meters and height 3 meters. Its radius is 5 meters, so the base area is square meters. The volume is cubic meters.
The diameter is not the radius. Substituting 10 for r would quadruple the base area. Keep in the answer unless a decimal is requested. Using 3.14 only at the end gives approximately 235.5 cubic meters.
If the tank contains water only 2 meters deep, use 2 as the filled height. The water occupies cubic meters, even though the full tank capacity is
Loading the 3-D view…
The cylinder has radius 5 meters and height 3 meters. Its volume is the disk-shaped base area times the height.
The cylinder has radius 5 meters and height 3 meters. Its volume is the disk-shaped base area times the height.
Describe this figure
The cylinder has radius 5 meters and height 3 meters. Its volume is the disk-shaped base area times the height.
Labelled: r = 5; h = 3.
Work backward with division
A prism has volume 168 cubic units and base area 28 square units. Its height is units. Dividing cubic units by square units leaves a length, which matches the quantity being found.
For a cylinder with volume and height 5, solve Then so the positive radius is 4. Do not stop at 16: that is the radius squared.
Volume is not surface area
Painting a cylinder requires the area of its outside surfaces; filling it requires volume. A triangular prism has rectangular side faces, but adding their areas does not find its capacity. The words “fill,” “hold,” or “space inside” point toward volume, while you should still read the full question carefully.
For a composite solid made of two nonoverlapping prisms, compute each volume and add. If one prism-shaped hole is removed from another, subtract the hole's volume.
Try it yourself
A prism has a trapezoidal base with parallel sides 4 and 10 and perpendicular height 3. The prism's length is 8. Find its volume.
Answer: The base area is Multiplying by 8 gives 168 cubic units. The 3 measures the trapezoid's height; the 8 measures the separation of the prism's bases.
What to remember
Find the area of the repeating base first, then multiply by the perpendicular distance through the solid. A base area already includes any triangle factor or circular