An arc is part of a circle's boundary; a sector is the wedge-shaped region between two radii and that arc. Both are measured by the fraction of a full turn they occupy. Radians make that relationship especially simple.
A radian compares arc length with radius
For a central angle that intercepts arc length in a circle of radius , its radian measure is Therefore when the angle is in radians.
One full turn has arc length so its angle is radians. Since the same full turn is we have radians. To convert degrees to radians, multiply by to convert radians to degrees, multiply by
Thus radians, and radians equals Radians are not another length unit. They express a ratio of two lengths, so the physical units cancel.
Derive arc length and sector area together
An angle of radians occupies the fraction of a full turn. Multiplying that fraction by circumference gives Multiplying it by disk area gives
With a degree measure , use and Do not insert a degree measure directly into the radian formulas.
Example: a sector and its entire boundary
A circle has radius 9 cm and a sector angle of Convert the angle to radians. The arc length is cm. The sector area is square centimeters.
The perimeter of the sector is not just its arc. It includes both radii, so it is cm. A request for the curved edge and a request for the complete boundary must be read differently.
You can check the proportion: so both the arc and sector occupy two ninths of their respective full-circle measurements.
An 80-degree sector uses two ninths of the full circle. Its boundary includes the arc and both 9-centimeter radii.
Describe this figure
An 80-degree sector uses two ninths of the full circle. Its boundary includes the arc and both 9-centimeter radii.
Example: recover an angle from an arc
A 10-meter-radius circle has an arc of length 15 meters. Then radians. Its sector area is square meters.
Combining with the area formula gives another useful relationship: This works because the same arc and radius define the sector. It does not mean a sector is literally a triangle with straight base ; the curved boundary is different.
If the radius doubles while the central angle stays fixed, the arc length doubles and the sector area quadruples. If the radius stays fixed while the angle doubles, both arc length and sector area double, provided the intended sweep is described consistently.
Arc length is not chord length
A chord is the straight segment joining the arc's endpoints. Except for a zero-length arc, that straight segment is shorter than the corresponding curved route for a minor arc. For a semicircle, the chord is the diameter whereas the arc is
Check whether a diagram marks the shorter or longer arc. The complementary central angle around the circle is or Use that angle if the question asks for the major arc instead.
Try it yourself
A sector has radius 6 and angle Find its arc length, area, and perimeter. Pause before looking at the answer.
Answer: The arc length is the area is and the perimeter is Lengths use linear units; area uses square units.
What to remember
Radians mean arc length divided by radius. Use the same fraction of a turn for arc and sector, and include the two radii when finding a sector's perimeter.