A scale is a constant ratio between corresponding lengths. Once you identify that ratio and its direction, you can move between drawings, models, and actual objects without guessing which way to multiply.
Define the scale factor explicitly
Let with both lengths measured in the same unit. Then every new length equals times its corresponding original length. If the new object is smaller; if it is larger.
A map labeled means one unit on the map corresponds to 25,000 of that same unit on the ground. Thus 1 centimeter represents 25,000 centimeters, or 250 meters. The ratio is dimensionless after the units match.
Example: a route on a map
A route measures 7.6 centimeters on a map. Its actual length is centimeters. Converting gives 1,900 meters, or 1.9 kilometers.
If the map is enlarged so every printed length becomes 1.5 times as large, the route measures centimeters. Its real length is unchanged. The new map denominator is approximately 16,666.7. Continuing to use the original printed scale after enlargement would overestimate real distances.
This is why a scale bar that enlarges together with a map remains useful: its physical length changes along with the drawing. A scale ratio printed as text does not update itself.
Example: infer scale from one pair
A rectangular courtyard measures 12 meters by 8 meters. On a plan, its longer side measures 9 centimeters. What should the shorter side measure?
The ratio between the two drawing sides must equal the ratio between the actual sides:
Thus centimeters. Alternatively, 9 centimeters corresponds to 1,200 centimeters, giving a drawing-to-actual factor of Multiplying 800 centimeters by that factor again gives 6 centimeters.
Using and then subtracting 3 from 8 would confuse an additive difference with a multiplicative relationship. Scale preserves ratios, not differences.
Length, area, and volume change differently
If all lengths are multiplied by perimeters are multiplied by areas by and volumes by A rectangle's area is a product of two lengths; a box's volume is a product of three. That explains the exponents.
A model built at has of the corresponding actual surface area and of the volume. Conversely, if two similar figures have area ratio their corresponding length ratio is the positive square root of the area ratio.
These rules require similarity: every corresponding length must change by the same factor. Stretching only a picture's width does not preserve its shape or allow a single scale factor for all lengths.
Try it yourself
A model's length is 15 centimeters and the actual length is 6 meters. Find the model-to-actual scale. If its roof has area 12 square centimeters, what is the corresponding actual area in square meters?
Answer: Six meters is 600 centimeters, so the scale is The area factor is making the actual roof square centimeters, or 1.92 square meters.
What to remember
Set the direction of the ratio, reconcile units, and preserve corresponding lengths. Use squared and cubed factors only when every dimension follows the same scale.