A surface-area problem asks which pieces of a solid's boundary are exposed. A net is a flat inventory of those pieces. The best strategy is to list the faces, identify repeated shapes, and account for openings or contacts before calculating.
A net turns wrapping into plane geometry
A closed rectangular prism has pairs of faces with areas lw, lh, and wh. Thus A right prism with base perimeter P, base area B, and height has lateral area Ph and total surface area
The lateral formula comes from unfolding the side faces into a strip: the strip's width is the entire base perimeter and its height is . This reasoning requires a right prism; an oblique solid's lateral faces need their own measurements.
Example: a triangular-prism package
A right triangular prism has a right triangle as its base and length 10. Each triangular end has area The lateral strip has width and length 10, so its area is 300.
The total surface area is square units. The volume, by contrast, would be cubic units. The numerical overlap between lateral area and volume here is coincidental; their units and meanings differ.
If the package has one triangular end open, subtract only one base area. The remaining surface area is 330 square units.
Example: a cylindrical label and closed can
A cylinder's curved surface unfolds into a rectangle with dimensions and . Its lateral area is and its closed total surface area is
For diameter 8 and height 11, is 4. A label covering the entire curved surface requires square units. The two circular ends add so the closed can's total is
A label with overlap allowance or uncovered margins requires adjusting the rectangle's dimensions. For example, adding 1 unit of overlap changes its width to not its radius. Translate the manufacturing condition into the net before applying a formula.
Tapered faces need slant heights
A right cone has lateral area where is the slant height. Its net is a sector of radius whose arc length is the base circumference The sector-area relation gives
Adding the base gives cone total area Volume uses perpendicular height instead, so a right cone may require first.
For a right square pyramid of base side 6 and face slant height 5, the four triangular faces have total area Add the 36-square-unit base to obtain 96.
Joining solids changes the exposed boundary
If two solids are attached along a contact region of area A, add their separate surface areas and subtract The joining face was counted once for each solid but is exposed in neither.
For a cube of side 4 attached to another congruent cube along a full face, the exposed area is You can verify using the resulting 8-by-4-by-4 rectangular prism.
Do not subtract only A: that leaves one copy of an internal face in the total. For a partial contact, use the actual contact area rather than the entire face.
Try it yourself
A right cone has radius 3 and height 4. Find its total surface area, including its base.
Answer: The slant height is 5 by the Pythagorean theorem. Lateral area is and base area is giving square units. Using height 4 in the lateral-area formula would be incorrect.
What to remember
A net identifies the surfaces to count and the dimensions each needs. Distinguish perpendicular from slant height, include only present faces, and remove both copies of an internal contact.