A pyramid or cone has volume one third that of a prism or cylinder with the same base area and perpendicular height. The formula is simple, but it depends on identifying B and correctly and recognizing when similarity changes both of them.
Taper changes the layer areas
A cone's cross sections parallel to its base are smaller circles; a pyramid's are smaller similar polygons. Their linear dimensions decrease toward the tip, and their areas decrease as the square of those dimensions. This varying stack produces the one-third factor.
For a cone, For a square pyramid, A pyramid with a triangular base requires calculating the triangle's area before applying the additional factor one third. The shape of the base does not change the overall rule.
Height always means perpendicular distance to the base plane. A slant height is a side measurement, not a substitute for .
Example: recover height from a slanted side
A right circular cone has radius 5 and slant height 13. A cross section through the axis contains a right triangle with legs and and hypotenuse 13. Thus
Its volume is cubic units. Using 13 in the volume formula would treat the slanted path as the perpendicular stack height. The picture should show the right angle at the base center.
For a right square pyramid, a face slant height uses half the base side in the corresponding right triangle. A lateral edge to a corner instead uses half the base diagonal. Identify which segment is given before choosing a horizontal leg.
Example: compare a cone and cylinder
A cone and cylinder have equal volumes and equal radii. Their base areas match, so The cone must have three times the cylinder's height.
If they instead have equal heights, their radii satisfy The cone radius is times the cylinder radius, not three times. Squared dimensions require a square root when you recover a length ratio.
These comparisons can be solved by canceling shared factors before substituting numerical values.
Removing a smaller similar cone
A cone has radius 6 and height 12. A cut parallel to the base removes a smaller cone at the tip whose height is 4. Similarity gives its radius as
The original volume is The removed volume is The remaining frustum has volume
The removed height is one third of the original height, but its volume is only of the original. It is narrower as well as shorter. This is why subtracting one third of the original volume would be wrong.
Check the physical meaning
For a fixed base and height, a tapered solid must have less volume than its enclosing prism or cylinder. Volumes are nonnegative and use cubic units. If solving an equation gives a negative radius or height, that solution cannot represent the stated solid.
Keep and radicals exact until the final numerical approximation. This is especially useful when subtracting similar-solid volumes.
Try it yourself
A square pyramid has base side 10 and perpendicular height 12. A smaller similar pyramid has half its height. Find both volumes.
Answer: The large volume is The small pyramid has side 5 and height 6, giving volume 50. The ratio is the cube of the length ratio
What to remember
Use base area and perpendicular height. For parallel cuts, use similarity to find the smaller base before subtracting volumes; every length change contributes to the cubic scale factor.