A vector describes a displacement with both magnitude and direction. In a coordinate plane, components tell you how far to move horizontally and vertically, while magnitude gives the resulting straight-line distance.
Components describe changes
The vector means move 3 units right and 2 units down. Translating its starting point does not change the vector; only the displacement matters.
From to subtract initial coordinates from final coordinates:
Reversing the direction gives Points name locations; vectors name changes between locations.
Add displacements component by component
If one move is and the next is the combined move is Horizontal changes add independently of vertical changes.
Graphically, place the second arrow's tail at the first arrow's head. The resultant runs from the original starting point to the final endpoint. This is the head-to-tail rule.
Subtracting a vector means adding its opposite. For example,
The two displacements have components (3, 2) and . Adding components gives the resultant (2, 6).
Describe this figure
- Column vector (3, 2).
- Column vector (-1, 4).
Example: distinguish distance from displacement
A person walks 6 meters east and then 8 meters north. The displacement vector is meters. Its magnitude is
The actual distance walked is meters. Magnitude measures the straight-line separation of start and finish, not the total length of a path with turns.
For any vector the magnitude is by the Pythagorean theorem. Negative components still contribute positive squares.
Scaling changes size and possibly direction
Multiplying by 4 gives pointing in the same direction with four times the magnitude. Multiplying by gives reversing direction and doubling magnitude.
In general, Magnitude is nonnegative, so it uses the absolute value of the scalar.
Example: find a unit vector
A unit vector has magnitude 1. For the magnitude is 13. Dividing each component by 13 gives
Its magnitude is and its direction matches the original. The zero vector has no direction and cannot be normalized by division because its magnitude is zero.
Direction must agree with the components
For a vector with and the direction angle from the positive horizontal axis satisfies The components form the legs of a right triangle, so the ratio is vertical change divided by horizontal change.
For vectors in other quadrants, an inverse-tangent calculator result needs adjustment to match the signs. The vectors and have the same quotient but point in opposite directions. Their direction angles differ by
When a question only asks for components and magnitude, there is no need to introduce an angle. A sketch showing right or left and up or down is often enough to check the direction. In particular, the negative of a vector must point exactly opposite, while its magnitude stays unchanged. This gives a geometric check on subtraction and scalar multiplication that is independent of the component arithmetic.
The magnitude of a sum is not usually a sum of magnitudes
For and the individual magnitudes are 3 and 4, but the resultant magnitude is 5, not 7. The turn changes the straight-line displacement.
If two vectors point in the same direction, their magnitudes do add. If they point in opposite directions, some displacement cancels. Therefore add components first and then compute magnitude unless the directions justify a simpler shortcut. Direction information is part of a vector and cannot be discarded before combining vectors.
Try it yourself
Let and Find and its magnitude. Then find the displacement from to
Answer: with magnitude 5. The displacement is with magnitude 13.
What to remember
Subtract endpoints to get displacement, combine matching components, and use the Pythagorean theorem for magnitude. Keep total travel distance distinct from straight-line displacement.