The unit circle connects angles to coordinates. It lets trigonometry describe any rotation, not just acute angles in right triangles, and explains the signs and exact values of sine and cosine.
Radians measure arc length relative to radius
A radian angle is defined by where is arc length and is radius. On a unit circle, equals 1, so the radian measure equals the corresponding arc length.
A full circle has circumference so one revolution is radians or Therefore radians. Convert degrees to radians by multiplying by and radians to degrees by multiplying by
For example, radians. Angles differing by an integer multiple of end at the same point; they are coterminal. Positive angles rotate counterclockwise, negative angles clockwise.
Coordinates define the functions
Starting on the positive x-axis, rotate by angle to the point on the unit circle. Then and When is nonzero,
The circle equation immediately gives Sine and cosine cannot exceed 1 in magnitude because they are coordinates on this circle.
Quadrant signs follow from coordinates: both positive in quadrant I; sine positive and cosine negative in II; both negative in III; sine negative and cosine positive in IV.
Exact values come from special triangles
A right isosceles triangle with hypotenuse 1 has legs giving the sine and cosine of
Bisecting an equilateral triangle produces a 30–60–90 triangle. After scaling its hypotenuse to 1, its legs are and Thus and the values exchange at
On the axes, the coordinates give the values directly: angle 0 ends at at at and at
Example: use a reference angle
Find and The angle is in quadrant II and is from the negative x-axis. Its reference triangle has coordinate magnitudes and
Apply quadrant signs: and Therefore
The reference angle supplies magnitudes; the original angle supplies signs. Do not replace the original angle by the reference angle without restoring those signs.
At 150 degrees, the unit-circle point has negative cosine and positive sine. The reference triangle gives their magnitudes.
At 150 degrees, the unit-circle point has negative cosine and positive sine. The reference triangle gives their magnitudes.
Describe this figure
At 150 degrees, the unit-circle point has negative cosine and positive sine. The reference triangle gives their magnitudes.
Marked points: 150°: filled marker at .
Example: a negative rotation
The angle ends in quadrant IV. Its coordinates are so cosine is and sine is This illustrates and
Arc length uses radians directly
The definition of radian measure rearranges to for a nonnegative angle measuring an arc. A circle of radius 6 cm swept through radians has arc length cm. If the angle is supplied as 60 degrees, convert it first; multiplying 6 by 60 would mix degrees with a formula derived for radians.
The same reference angle can occur in four quadrants with different coordinate signs. For instance, an angle with reference angle can have cosine either or A statement such as “the sine is one half” therefore does not determine a unique angle without an interval or quadrant condition. Keep magnitude, sign, and angle location as separate decisions, and use the circle to reunite them. Tangent is undefined at the vertical-axis points because the horizontal coordinate is zero.
Try it yourself
Find the exact sine and cosine of Then state whether its tangent is positive or negative.
Answer: The reference angle is in quadrant IV. Sine is cosine is and tangent is
What to remember
Radians describe rotation through arc length. On the unit circle, cosine is horizontal and sine vertical; reference triangles give magnitudes and quadrants give signs.